Experience as Material Technician

• Employer

  Wimpey Laboratories

• From

  01 January 2013

• To

  01 April 2016

• Detail

  ASPHALTTESTS:
  Extraction, Ignition & Gradation, Preparation of Marshall Specimen, Bulk Density of compacted mixtures marshal stability & Flow, Voids in Mix, Voids in mineral aggregate, stiffness, Voids filled with bitumen, Loss of Marshall stability, Asphaltic Pavement Core Cutting for checking thickness & compaction Test. Aggregated hot bin Cold Bin, Sample Sieve Analysis Aggregate Specific Gravity, Bulk Specific Gravity.
  
  CONCRETE TESTS:
  Slump, Temperature, Cube Preparation, Cube Curing, Comprehensive Strength Test, Plant Trials, Air Content, Density of fresh concrete, bleeding of fresh concrete, Absorption Tests, Rapid Chloride Permeability test, Water Permeability test, Grout work sand grout cube Testing.
  
  AGGREGATE TESTS:
  Grading, Specific Gravity, water absorption, Flakiness, Elongation Index & Soundness, Aggregate Impact Value, Aggregate Crushing Value, Abrasion test.
  
  SOIL TESTS:
  Sampling, Sieve analysis, maximum Dry Density (Proctor), California Bearing Ratio (CBR) Sand Equivalent, Sand Calibration, Field density for compaction test, Liquid Limit, Plasticity index, Loss Angles Abrasion, Linear Shrinkage.
  
  STEEL TESTS:
  Tensile, Bend and Re-Bend, chemical Testing of Steel Reinforcement Bars.
  
  BITUMEN TESTS:
  Bitumen Penetration Test, Specific Gravity of Bitumen, Flash and Fire Point of Bitumen
  

Experience as Junior QC Inspector

• Employer

  Nael & Bin Harmal Hydroexport LLC (NBHH)

• From

  01 April 2016

• To

  31 January 2017

• Detail

  • Checking of worksheet report and approval of test reports prior to use.
  • Coordinate with the client for their testing requirements; clarify doubts in the test results.
  • Verification of testing activities through cross verification, site visit, etc.
  • Understanding test methods and procedures.
  • Documentation and Data Control.
  • Dealing with Client & Consultant.
  • Dealing with Supplier
  Special Site Tests:
  Road Marking (Yellow Line, White Line, Give Way, Rumble Strips)
  In-Situ Load Test on Guard Rail
  Rip Rap material Sieve analysis & Testing of Bedding material for Stone pitching
  
  Non-Destructive Testing (NDT):
  Pull Out strength Test of Anchor Bolt
  Pull Out Strength Test of Paint
  Coat Thickness Test for light poles, Anchor Bolts, Cover Drains
  Concrete Temperature monitoring in inside concrete using thermocouple.
  

Experience as QC Inspector

• Employer

  Nael & Bin Harmal Hydroexport LLC (NBHH)

• From

  01 January 2018

• To

  01 May 2019

• Detail

  • Getting Source approvals of Different material as per project specification.
  • Experience of working on international standards BS and ASTM.
  • Keep daily records and report to the senior Materials Engineer.
  • Carry out daily inspection of the works and sign off the relevant part of the contractor’s RFI’s in a timely manner.
  • Review the contractor’s material submissions.
  • Review all materials test results.
  • Analysis of test data and corrective action to prevent non-conforming products.
  • Verify the activities of the technician and assistant technician as well as the work sheets of the tests conducted by the laboratory technician.
  

Experience as QC Inspector

• Employer

  Western Bainoona Group

• From

  01 May 2019

• To

  31 December 2020

• Detail

  • Following & Taking closing steps to close “NCR’s & NNC”
  • Following & Taking closing steps to close “Site Surveillance monitoring Reports” (SSMR)
  • Planning and conducting witnessing of material laboratory tests along with consultant in 3rd Party Labs
  • Planning and arranging Factory tests (FAT) for approval of material from suppliers for consultants
  • Keeping quality controls of material being used as per project specification.
  • Getting Source approvals of Different material as per project specification.
  • Experience of working on international standards BS and ASTM.
  • Keep daily records and report to the senior Materials Engineer.
  • Carry out daily inspection of the works and sign off the relevant part of the contractor’s RFI’s in a timely manner.
  

Experience as Senior QC Inspector

• Employer

  China Railways construction & Contracting

• From

  10 January 2021

• To

  17 February 2022

• Detail

  • Raising and closing material inspection Requests as per project specifications (MIRs)
  • Raising and closing Inspection and Testing Requests as per project specifications (ITRs)
  • Making Material submittals (MAR), following and closing comments in CRS of Material submittals.
  • Maintaining frequencies of Steel, concrete Raw Material, Concrete, geo textiles, Sub Ballast material, Ballast Material, Embankment Core
  • Reviewing and submitting “Inspection & Test Plan” (ITP)
  • Reviewing and submitting “Method statements”