Experience as Senior Panel operator

• Employer

• From

  07 March 2016

• To

  26 December 2019

• Detail

  SEPARATION SYSTEM
  Capacity (6000 Barrels).
  ? Three phase separation process.
  ? Sour water separation system.
  ? Slug catcher system.
  ? Pigging system.
  
  CRUDE STABILIZATION SYSTEM
  ? Capacity (4000 Barrels).
  ? Crude Oil sweetening and stabilization unit (Removing H2S and volatile hydrocarbons to control the RVP, Thereby reduce the evaporation losses from the Oil when it is Stored and handled at atmospheric pressure).
  
  ? GAS SWEETENING UNIT (MDEA)
  ? H2S Removal by "MDEA Flow Process." The unit consists on followings equipment’s:
  ? Sour gas "Absorber" and regeneration system.
  ? Kettle type Re-boiler and amine transfer pumps.
  ? Amine filtration system.
  GAS DEHYDRATION BY (TEG):
  ? Glycol Absorber and Regeneration system
  ? Glycol Flash Drum.
  ? Glycol Re-boiler by and Transfer PD Pump.
  HP&LP Flare System
  ? Concentrated acid gas produce during amine regeneration.
  ? Gas when depressurizing the facilities in case of emergencies
  ? Gas when depressurizing individual vessels(through their safety/relief valve)should they exceed their maximum allowable working Pressure
  Heat Medium System
  ? In the heat medium system the heat transfer fluid is thermal oil(Sunoco Oil 21) the thermal oil is heated in direct fired heat boiler
  LP&MP GAS COMPRESSORS
  ? Multistage Reciprocating type P.D. Compressors driven by WAUKESHA fuel gas engines.
  ? LP gas compressor convert LP Gas to Mp Gas
  ? MP gas compressor convert MP Gas to HP Gas
  WELLHEAD OPERATION:
  ? Wellhead control with Pannel also all operating and controlling all parameters.
  ? Well opening sequence & Well closing sequence.
  ? Shutdown functions like SCSSV & SSV.
  ? Crude oil lifting with gas injection.
  ? Natural & Gas injection lift crude Oil Wells.
  ? High pressure/Low pressure Separators, Gas boot tower and HP/LP flare system.
  ? Multistage Reciprocating type P.D. Compressors driven by WAUKESHA fuel gas engines.
  ? Crude Oil storages and pumping.
  KHAUR CRUDE OIL DECANTING FACLITY (KCDF):
  I also worked as Shift In charge at KCDF i.e. decanting of Bowzers & filling, oil receiving and dispatch to refinery by pipe line, crude metering system.
  

Experience as DCS plant operator, (Boardman)

• Employer

• From

  20 June 2013

• To

  07 March 2016

• Detail

  Engro polymer & chemicals limited is a DuPont certified petrochemical chloral vinyl complex manufacturing Ethylene dichloride, Vinyl chloride monomer, HCL, Hydrogen, 50% Caustic and Chlorine gas. Complex is equipped with latest equipment and modern instrumentation & controls including DCS.
  I have working experience on the following equipment.
  Distillation columns (Azeotropic, Vacuum distillation)
  ? Multistage Centrifugal Compressor(4 stages with intercoolers,5kg P)
  ? Multistage PD Compressor (02 stages, double acting, balanced apposed with 24kg pressure)
  ? Gas dehydration Towers
  ? Hydrogen gas treatment unit
  ? Electrolyzer perfloro carboxylic membranes nature circulation.
  ? Absorber, Adsorbed & Stripper
  ? Stripping section (Vacuum & steam stripping)
  

Experience as DCS plant operator, (Boardman)

• Employer

• From

  22 September 2007

• To

  20 June 2013

• Detail

  Chemical-processing-DCS plant operator, (Boardman) 22/09/2007–20/06/2013
  Monitoring, controlling and supervision of unit through DCS .Safe plant operation (Normal Start-up and shutdown), Emergency handling. To control all parameters, efficient maintenance of plant through PTW system. Preparation of SOPs for normal operation, emergencies, turnaround. Preparation of shift reports. Ensuring on specification production. Daily Material Balance, Monthly Activities, Daily Lab result: Production 600 tons per day Double shaft vertical kiln equipped with DCS system is a huge project for Lime production. Its related equipment is P.D blowers, boiler, fuel oil system, gas fuel system, dustCollector filter, hydraulic system and also attached with oil handling system.Analyze oil samples & oil preheatingLubricate and cleanequipment.
  ? Circulate oil and chemicals in process units.
  ? Report malfunctioning equipment.
  ? Operate oil heaters, furnaces, compressors, exchangers, reactors, quenchers, stabilizers, fractionators, rechargers, absorbers, strippers, debutanizers, and towers.
  ? Monitor variables such as temperature, pressure, vacuum, and time
  

Experience as Senior Technician (CRO)

• Employer

• From

  09 January 2003

• To

  18 October 2007

• Detail

  CRUDE STABILIZATION SYSTEM
  ? Capacity (4000 Barrels).
  ? Crude Oil sweetening and stabilization unit (Removing H2S and volatile hydrocarbons to control the RVP, Thereby reduce the evaporation losses from the Oil when it is Stored and handled at atmospheric pressure).
  ? Three phase separation process.
  ? Sour water separation system.
  ? H2S Removal by "MDEA Flow Process." The unit consists on followings equipment’s:
  ? Sour gas "Absorber" and regeneration system.
  ? Kettle type Re-boiler and amine transfer pumps.
  ? Amine filtration system.
  ? Waste water treatment plant.
  WELLHEAD OPERATION:
  ? Well opening sequence & Well closing sequence
  ? Shutdown functions like SCSSV & SSV.
  ? High pressure/Low pressure Separators, Gas boot tower and HP/LP flare system.
  ? Multistage Reciprocating type P.D. Compressors driven by WAUKESHA fuel gas engines.
  ? Crude Oil storages, Filling, Decanting and pumping.