Experience as BSS Deployment Engineer

• Employer

  IKAN ENGINEERING SERVICES

• From

  02 April 2007

• To

  30 April 2008

• Detail

  Working as an Telecom Engineer in IKAN ENGINEERING (Telenor Project) which covers the following:
  • BTS installation including Eltek Power rectifier, Cabling, Grounding, Feeder cables etc.
  • COWO site Installation including Power rectifier, Cabling, Feeder cables etc.
  • BSC installation including Eltek power rectifier, Cabling, Grounding, Feeder cables etc.
  

Experience as Sr Technical Support Engineer (LTAC)

• Employer

• From

  01 May 2008

• To

  30 May 2013

• Detail

  • Troubleshooting of ALCATEL BTSA9100 or G2 andG3 GSM900 and DCS1800 Cabinets issues. (MBI5, MBO2, MOCO).
  • Online and offline commissioning of BTS Cabinets during the fault diagnosing& new commissioned sites
  • Troubleshooting and maintenance MTRX, SUMX, SUMA, ANCG/ANCD,AGX-9/18 HWs,TGT-09/TGT-18, TRAGE/TRADE++, AGC-09/1.
  • Expertise in all alcatel BSS issue as well provide field and remotely support to team for resolve the issues like site OML down, site O&M down, Offline mode activity.
  • Expansion cases can be handling with proper and standardize method
  Commissiong of the newly powered up BTS sites
  • Downloading of BTS SW in offline mode to check operational status of
  • (HW, to perform VSWR Test and to Tx Power of Radios)
  • Commissioning and configuration MT120 Cards of the Transcoder
  Commissioning of MX9130 BSC
  
  • To upload BSS SW package using Fedora 6
  • Commissioning of OMCP Boards
  • Commissioning of Alarm Box using wago.
  
  
  
  Commissioning of MX 9130 MFS
  • Loading of BSS SW Package
  • Online configuration
  • Cut over of the newly commissioned BSC’s
  • Migration of the BSC’s software(B8 to B9)
  • Migration of the BSC’s Software (B9 to B10)
  • Migration of the BSC’s Software (B10 to B11)
  • Migration of the BSC’s Software (B11 MR1 to B11 MR3)
  • Migration of the BSC’s from one Switch to another
  • Expansion of the BTS sites( expansion of DCS )
  

Experience as BSS TL ( Field Switching Engineer)

• Employer

  Ericsson Pakistan

• From

  03 June 2013

• To

  04 May 2015

• Detail

  Ericsson 3G
  • Operation & Troubleshooting Ericsson 3G DUW cards.
  • Upload CV.
  • DUW card integrate,
  • Maintain IDB and Troubleshooting RRUs/RUS.
  • Ensure timely resolution of BSS product issues.
  • Maintain technical KPI s as per targets & Network analysis.
  • Ensure timely and accurate reporting of operational KPIs and activities to management.
  • Restoration of network outages and resolution of BSS Hardware issues through field intervention and follow-up with vendors to maintain network KPIs.
  • Handle all BSS/TXN errors like (TCH Availability, CSSR, DCR, IHSR, HSR, RTC and MPD) as per given Target/RF request.
  • Monthly analysis and evaluation of vendors by capturing the SLAs and TTs
  • Active participation in ongoing swap Alcatel to Ericsson.
  • Provide remotely/Field support to teams.
  • • Reporting progress to customer (and management) regularly on weekly hour’s basis and daily basis regarding TCH.
  • CM (Corrective Maintenance) doing for the Network Maintenance and Outages restoration.
  Supervision for all O&M activity.
  • Assist Team for BSS issue in Region and provide Technical assistance to team.
  • Managing all reduction/expansion activity in network to improve TCH
  • Give support of ALU OMC and Ericsson OMC to Field team
  • Managing all TCH team movement.
  • Give back office /Field support to team for RF issues, TCH issue
  • Resolving Zero call issue, IHSR,DCR issue
  
  

Experience as RAN Engineer

• Employer

  Ericsson Pakistan

• From

  04 May 2015

• To

  31 January 2017

• Detail

   Hand on experience on Ericsson traffic nodes release 3, 4, and 5 (2pB, 6p/6PC, 20p/20PB, and compact node).
   Hand on experience on Ericsson TXN modem cards (MMU2b, MMU2C, MMU2H, MMU2F, MMU2K, ETU and LTU)
   Hand on experience on Ericsson NPU (NPU 3D, NPU 1D, NPU1C, NPU3C, NPU1,NPU3, NPU1B)
   Upgrade of Transmission nodes (2p, 6p, 20p) and Radio links from release 2 & release 3 to release 5 within the given time limits.
   Perform cutovers of STM links by replacing HI CAP with MMU2K links with in the given outage limits.
   E1’s routing for 2G sites.
   Visibility of transmission nodes through DCN over traffic and through PPP.
   Visibility of TN through DCN or VLAN.
   Responsible to swap the site within the given outage time limits.
   Responsible to align the ASP team and give them brief training
  About the quality standards of Ericsson equipment.
   Give on site and online support to the SUB contractors.
   Trouble shooting.
  
  

Experience as CNS Engineer

• Employer

• From

  14 February 2017

• To

  28 November 2019

• Detail

  Worked as CNS Engineer at RAK International Airport in CNS department 2017 to NOV-2019
  
  Responsibilities
  • Preventive and corrective maintenance of CNS equipment like RDPS, FDPS, VCCS, AFTN, VHF/UHF Radio, ILS & AWOS system.
  • Ground checks and Calibration of Radio Navigation aids like ILS, DVOR & DME.
  • Maintenance of all Radio Communication System like VHF transmitter and Receivers, ICOM Handheld Radios.
  • Monitor and rectify complaints or issues reported by ATC, MET and other departments on a real time basis.
  • Modification & Repair of Electronics circuit boards.
  • CNS Equipment status monitoring and to take necessary action in the event of fault (Alarm or warning).
  • Preparation of Daily, Weekly and Monthly equipment status reports.
  • Daily routine checks of CNS / Tower equipment..
  • Network line tracing, pulling and termination of CAT5/6 Copper & optical fiber cables.
  • Trouble shooting & Monitoring of CCTV cameras
  • Operation of Grip tester and calculation of runway friction readings.
  • Maintenance of Metrological equipment like wind sensor, rain gauge, humidity sensor, barometer QNH etc.
  • Calibration and maintenance of RVR, Ceilometer.
  • General inspection, fault diagnosis and maintenance of Terminal Security and screening systems like baggage & cargo inspection SMITH X-Ray machines, archway & handheld metal detectors.
  
  

Experience as ATE Engeineer

• Employer

• From

  15 December 2019

• To

  To date

• Detail

  Working as ATE Engineer at Fujairah International Airport in FANS (Fujairah Air Navigation Services) since year 2019.
  
  Responsibilities
  • Installation and configuration of Approach & Control Tower VHF/UHF wireless Radios.
  • Integration of wireless communication radios with voice communication Switch (Schmid VCCS).
  • Installation of remote control Panels for ATC systems monitoring in the workshop.
  • Integration of CNS Equipment to monitor the ATC equipment’s failure and to ensure the minimal disruption in operation.
  • General modifications and upgrades to systems that have issues, outdated and can’t be repaired.
  • Ensuring the calibrations are always updated (e.g. Flight calibration (ILS, DVOR/DME), test equipment (PIR, multi-tester, frequency counter and oscilloscope).
  • General maintenance of MLAT system.
  • Managing the maintenance, troubleshooting, repair and reconfiguration of the systems for reliability and integrity.
  • Ensuring the routine maintenance, daily checks and maintenance records are up to date.
  • Equipment faults reports and log books are maintained properly.
  • Work strictly in accordance with local Instructions and Guidelines to the highest standard
  • Ensure all levels of CNS\ATM preventive maintenance are completed to the highest standard.
  • Participate in the development and maintenance of the current and future design of the Surveillance system assets, such that they meet operational, safety and regulatory requirements
  • Coordinate with other ANSPs for technical interfacing integration and communication
  • Evaluate impact of obstacles (buildings, wireless phone towers) around airports on the functionality of Surveillance systems, and escalate in case of obstacle being unacceptable
  • Translate air traffic Surveillance requirements of Control Centers and ATS Units into technical plans and programs by developing system design concepts, outlining technical performance specifications, identifying procurement requests and defining installation and testing standards
  • Participate in the testing and commissioning and hand-over of Surveillance systems projects and ensure that the delivered system meets all the requirements in terms of specifications and performance.
  • Participate in system design review (SDR), preliminary design review (PDR) and critical (CDR) design review meetings.
  • Participate in the analysis systems trouble reports (STRs) and conduct required modification programs and systems change process (SCPs)
  • Develop Requests for Proposals (RFPs), participate in the evaluation and selection of proposals and contractors, including assessing post-installation training, and draft the technical sections of the contract.
  • Support maintenance activities of Surveillance systems as needed to ensure that all systems are operating effectively.
  • Monitor on-site progress and ensure that tasks and activities and are being completed as per agreed specifications and quality standards, and taking appropriate action in the case of any deviation.
  • Training and supervising less experienced engineers, technicians and contractors to ensure that all tasks and activities are progressing on time and within budget
  • Ensure that all laborers and contractors are well trained and equipped to conduct their work in line with international health and safety standards
  • Support in monitoring day-to-day activities to ensure compliance with stipulated policies and procedures
  • Contribute to the identification of opportunities for continuous improvement of systems and processes taking into account leading practices, changes in business environment, cost reduction and productivity improvement.
  

Basic training on VCCS (GAREX-230 MID)

• Duration

  1 week
• Description

  Basic training on VCCS (GAREX-230 MID) that how to create lines, groups in Garex 230. And how to check the status through software and hardware.

Basic training on Ricochet Recorder

• Duration

  01 day
• Description

  Basic training on Ricochet Recorder that how to extract the recordings.

System configuration training on VCCS

• Duration

  4 days
• Description

  General status check for Schmid VCCS system.

Engineering training for AFTN Message Gateway

• Duration

  3 days
• Description

  general status checking for AFTN Hardware/ Software system.

Installation, Maintenance & Programming of UHF/VHF Airband Radios

• Duration

  3 days
• Description

  Installation, Maintenance & Programming of UHF/VHF Airband Radios

AWOS Operational & Technical training

• Duration

  4 days
• Description

  Familiarization of AWOS sensors and how to check their status through system.

Maintenance training on Air band radios

• Duration

  August 12th – 16th 2018 (1 week)
• Description

  Level 1 Familiarization with UHF and VHF band radios and basic troubleshooting .