Experience as Instrument Engineer (Mechanical Completion)

• Employer

  Saipem S.p.a

• From

  02 January 2023

• To

  To date

• Detail

  Leading execution of work for project FIRENZE FPSO of Mechanical Completion, Pre-Commissioning & Commissioning activities.
  Mechanical Completion (MC) the checking and testing of equipment and construction to confirm that the installation is in accordance with drawings and specifications and ready for commissioning in a safe manner and in compliance with project requirements.
  Day to day walk down for system completion. Assisting the construction team, subcontractors, and vendors with the installation of the Instruments of Refurbishment and Conversion unit to complete the ‘A’ scope ITRs, Inspection, and Punch List activities for the final handover of Sub-Systems.
  Ensures that all activities within his area of responsibilities are done in full compliance with the HSE requirements Acknowledge the involvement of its job role in the PTW system and verifies the safety measures described in the PTW for its job role involvement, including area preparation, restoration, identifies and control hazards to avoid damage to equipment, personnel, and the environment.
  Supervise and approve construction activities and co-ordinate various aspects of project construction including inspections, material submissions and working drawings from contractors, and processing documentation as required.
  Handle all aspects of Instrument Construction activities including site investigations, site surveys etc.

Experience as E&I Supervisor

• Employer

  Adyard Abu Dhabi LLC

• From

  24 August 2021

• To

  30 December 2022

• Detail

  Leading execution of work for project Pipeline Surveillance System Upgradation of Telecom Network and F&G System.
  Monitoring and recording the number of contractor employees on-site.
  Coordinating, monitoring, and verifying the commissioning activities of Project Site Contractors associated with Electrical and Instrumentation, Coordination with the Client’s project teams and operations teams.
  Attending weekly meetings with Client and PMC for planning and scheduling, loop check and functional logic check with Client personnel, Site Acceptance Tests of Telecom Network, and F&G Systems.
  Planning and coordinating resources and equipment for the field tasks to conduct the work in a safe, timely, and cost-effective manner.
  Providing regular feedback to the Construction Manager on progress, achievements, safety, and quality-related issues.
  Ensuring that the standard of workmanship and the materials/equipment is compliant with the specifications and that specified inspections and tests are conducted and records maintained to substantiate conformance.
  Establishing effective communications with the Client's field representative, through discussions, and such other arrangements as are required to maintain close working relationships.
  Supervising the trench excavation work, FO Cable Pulling, laying in the trench, and following backfilling procedure.
  Administrating on-site work using proper procedures and instructions for Construction, or projects to ensure compliance with safety, specification, standard, and procedures to achieve the highest quality of work.
  Supporting & assisting in carrying-out on-site execution for internal & client’s PTW (Permit to work) system.

Experience as Instrument Foreman

• Employer

  Miraj Instrumentation Services (I) Pvt. Ltd.

• From

  15 June 2006

• To

  27 March 2009

• Detail

  Undertook instrument calibration like PT, FT, TT, LT, and DPT, installation, cable pulling, laying, glanding and termination, cable marking, continuity checking, cable using tray, and conduits. Cable Tray and conduit installation. Performed loop checking, functional / sequence checking Pre-Commissioning, and testing & commissioning of instrument systems and equipment.

Experience as Instrument Supervisor

• Employer

  DODSAL ENGINEERING & CONSTRUCTION LLC

• From

  07 December 2012

• To

  20 July 2014

• Detail

  Supervises subordinates and Sub-contractors to carry out Tray Installation, Conduit Installation, JB Installation, Panel Installation, Instrument Installation, and All types of F&G Device Installation, Fire Alarm System Installation, Instrument Cable pulling, Cable laying, Cable dressing, Cable glands and termination, Cable marking, Cable using tray and conduits, Tubing work for Impulse Line and Air Line. Supervises Technicians to carry out Instrument Calibration, Loop Testing, Functional Testing, Pre-Commissioning, Testing & Commissioning of all process variables, F&G, and Fire Alarm System in an agreed timescale, using safe and appropriate methods and agreed procedures. Experience in Instrumentation Control & Safety System (ICSS). Co-ordinating with Client QC Personal for Site Inspection, Walk Down, and Punch List activities for the final handover of Sub-Systems.

Experience as Instrument Supervisor

• Employer

  Qcon - Qatar Engineering & Construction Company W.L.L

• From

  03 September 2014

• To

  28 April 2015

• Detail

  Lead the execution of shutdown works for instrumentation to ensure completion within the specified window. Supervise work execution on-site, using proper procedures and instruction for either maintenance, shutdown, or project to ensure compliance with safety, specification, standard, and procedures to achieve the highest quality of work. Supervises subordinates to carry out Plant Shutdown activities; Dismantling and Re-Installation of Cable Tray, Conduit, JB, and Field Instrument. To carry out Calibration, Maintenance, and Repair, Loop Checking, Pre-Commissioning, Testing & Commissioning work sequences according to system priorities and highlight critical works to facilitate planned commissioning activities, and Instrument Metering. Witnessing and performing an inspection with the client.

Experience as Jr. Instrument Engineer

• Employer

  HLG Contracting LLC

• From

  30 May 2015

• To

  30 March 2019

• Detail

  Reviewed Vendor documents of VFD, PLC, RTU Panels, and Water Analyzer documents for the complete package (major ones were GAD, Sample System Diagram, Power supply, and Wiring Diagram, Serial Interface Block Diagram, Sample flow calculation, Probe GA and Wake frequency calculation and Bill of Material).
  Evaluated Engineering Queries and Commissioning Plans, mark-up, and reviewed System Boundary Drawings, Commissioning Procedures, Startup, and System Completion.
  Responsibilities during the Construction Phase of the project, assisting the subordinates or Sub-Contractors, and Oversee the construction works of the Control panel, Building Fire alarm system, FM200, F&G Device, and Electrical & HVAC Panel Installation.
  Performing multi-skilled craft workers in the installation, repair, preventive maintenance, removal, or adjustment of equipment or components in accordance with established project procedures, requirements, and specifications.
  Assisting in the interpretation of engineering drawings, work orders, specifications, and manufacturer’s technical data materials, also assisting in diagnostics of equipment failures and recommending solutions.
  Assisted in the completion of ‘A’ scope ITRs, Walk Down, Inspection, and Punch List activities for the final handover of Sub-Systems.
  Troubleshot and resolved field design problems, draw discrepancies, and coordinated such matters with the client, prepared Mechanical Completion, Commissioning Handover Dossiers, and system handover to operations.
  Developed Operations and Maintenance Manuals, and training manuals for all disciplines of the Water Reservoir & Pumping Station Project for the “KAHRAMAA” End User.

Experience as Instrument Engineer

• Employer

  Target Engineering & Construction Co LLC

• From

  17 December 2019

• To

  16 August 2021

• Detail

  Analyzed current equipment; identified areas of inefficiency and needs for improvement; designed and developed instrumentation to meet those needs.
  Collaborated with other engineers to develop accurate, efficient equipment and instrumentation in accordance with safety and usability standards and client expectations.
  Managed implementation of new measuring devices and control systems, ensuring devices are correctly installed and properly tested.
  Spearheaded the execution of shutdown works for Electrical & Instrumentation to ensure completion within the specified window.
  Prepared FAT/SAT Report, Method Statement, and Construction Check List for all E&I activities, also prepared & reviewed HIRA/TRA for Permit System of ADNOC Gas Processing (AGP).
  Attending daily & weekly meetings with Client and PMC for PTW requirements, planning and scheduling, loop check and functional logic check with Client personnel, Site Acceptance Tests of UPS Panel, and Fire Alarm Devices.
  Assisted subordinates or Sub-Contractors, and monitored construction works of UPS Panel installation in Control Buildings, Installation of Building Fire alarm system, F&G Device Installation, Replacement of Obsolete Non-Redundant UPS & Batteries, VESDA Modification, Electrical, and HVAC Panel & JB Installation, Cable Tray Installation, Cable Pulling, cable laying in trays/trenches, cable Glanding, and termination for all systems, power-up of all systems inside the FAR (Field Auxiliary room) buildings.

Work Management System

• Duration

  3 Years
• Description

  WMS PTW Performing Authority & Job Performer