Sulaiman Khan
Electrical Engineer
Doha
Summary of Career
1. I have 5 years experience in Electrical Engineering, Power Engineering, Quality Control, Towers, Buildings and Infrastructure construction field.
2. My specialty is high voltage, low voltage and extra low voltage engineering with keen knowledge of high current and low current engineering, High voltage, Low voltage distribution, Power engineering, HV & LV substations, electrical assemblies such as circuit breakers, switch-gears, transformers, unit substations, Installation, Gland-ding and Termination of MDB, SMDB, DB, MCCB, MCB, CB. UPS System, Lighting Control System, Security System, Small Power System, Earthing works, CCTV System, BMS Syst
3. Observing Daily activities of contractor and Issuance of Preventive Reports through agreed communiation channels to meet project objectives, updating daily log sheets for all sites observations.
4. Raised and implemented all RFIs for the completed activities and followed it up till the closure of comments given by client’s inspector and get it approved
5. Installation of different electrical equipment and devices such as SMDBs, DBs, MCCBs, wire pulling, trays and trunking, lighting fixtures, FACP panels, smoke detectors and emergency lighting system and ensuring that it is as per project specifications.
6. Managing and supervising 2nd fix (cable laying, pulling and their termination) in Power socket, Switch Plates, Industrial sockets including single phase and three phase. And Installation of 3rd Fix.
7. Daily Reports as per communication plan to construction manager on site activities ? Managing Weekly site observation reports sharing through emails to contractor’s engineer and Management.
8. Monitoring and control the quality of works in different MEP activities such as installation of containment, cable conduits, trays, sizing, jointing, terminations and testing. Works included lighting, small power, CCTV, ACS, Central Battery System, Fire Alarm System, BMS, Telephone and Data, Grounding and Lighting protection, and making sure that it’s as per QCS 2014 and Kahramaa Specification.
9. Purchasing of Project consumable materials (Cable Tiles, Warning Tapes, Lugs, cable joints etc.) Here I was involved in all process of purchase starting from enquires, material selection and issuance of purchase order from our side.
10. Verification of Redline Mark-up drawings and As built drawings on site submitted by contractor.
Experience as Trainee Engineer
Water and Power Development Authority
30 August 2016
17 December 2016
? Successfully rendered support in power electrical, mechanical and control system department after getting training. Analyzed the working analogy of whole system
? Effectively supervised Tarbela power station, NTDC Telecom work. Managed power line carrier system, supervisory control and data acquisition, remote terminal unit - 400, optical fiber grounded wire while providing support in protection and instrumentation section of generator, transformer and transmission line
? Arrangements of HV ( 11KV ) Shutdown for connection of Distribution substation from Primary Substation
Experience as Electrical Engineer
Muhammad Ishaq Khattak Construction Company Peshawar
16 December 2016
15 December 2017
Duties and Responsibilities:
? Processed all types of permits, including Authorities Permissions, Road Opening Permits, Emergency Opening Permit related to nature of job and ensured that all related documents are present on site before activity starts. These permits includes Baladiya permission, Traffic police.
? Supervise the productivity of the cable dispatching and integration team and be the point of contact for any new wiring deployment requests generated by our clients
? Implemented local regulations and manufacturer recommendations for the Installation of Electrical wiring and Electrical Equipments
? Checked the quality of works such as lighting, small power, CCTV, Grounding and Lighting protection.
? Supervision and inspection of lighting, power, lightning protection and earthing systems.
? Installations & termination of step down transformer 11kv/0.415kv.
? LV and MV installations and distributions.
? Faults locating on the distribution system (i.e. cable & transformer) and managing the necessary emergency maintenance
? Checking and verification of technical submittals
? Prepared daily, weekly and monthly progress reports.
? Managing day to day activities of site in order to meet the agreed baseline and achieve the target
? Rectification of consultant comments given on Inspection Request or given by consultants during site walk observation with in the agreed time frame
? Reported to Project manager and Chief Operating Officer regarding project progress and issues handled
? Successfully prepared project Dossiers and handed it over to client
Experience as Electrical Site Engineer
QD-SBG Construction Company
05 July 2018
Duties and Responsibilities:
? Observing Daily activities of contractor and Issuance of Preventive Reports through agreed communiation channels to meet project objectives, updating daily log sheets for all sites observations.
? Reviewing method statements, material and shop drawings against project construction specifications and drawings.
? Purchasing of Project consumable materials (Cable Tiles, Warning Tapes, Lugs, cable joints etc.) Here I was involved in all process of purchase starting from enquires, material selection and issuance of purchase order from our side.
? Coordinating and resolving sites conflicts with other disciplines so that the project execution shall remain in smooth and productive manner.
? Verification of Redline Mark-up drawings and As built drawings on site submitted by contractor.
? Monitoring and control the quality of works in different MEP activities such as installation of containment, cable conduits, trays, sizing, jointing, terminations and testing. Works included lighting, small power, CCTV, ACS, Central Battery System, Fire Alarm System, BMS, Telephone and Data, Grounding and Lighting protection, and making sure that it’s as per QCS 2014 and Kahramaa Specification.
? Taking Weekly Look ahead program from contractor on weekly basis and follow it up so that the project shall complete on time with quality.
? Verifying design calculations on sites and arranging meetings with construction manager and contractor project engineer in case of design modification if required.
? Routine Store checking for stored Electrical materials as per Project Quality Plan ( PQP) and manufacturers recommendations
? Raised and implemented all RFIs for the completed activities and followed it up till the closure of comments given by client’s inspector and get it approved
? On site permits checking, License of the working person and proper safety required for the task to complete safely.
? Daily Reports as per communication plan to construction manager on site activities
? Managing Weekly site observation reports sharing through emails to contractor’s engineer and Management.
? Attending weekly progress, quality meeting and HSE meetings, giving my inputs in order achieve target with high quality and safety.
? Checking and verifying different MEP clearances given to other construction disciplines.
? Discussing daily plan with construction manager and implementing it on site.
? Weekly meeting with construction manager and contractor representatives and suggesting actions needed on site in order to meet the deadlines
? Verifing Contractor’s invoices and claims against progress on site.
? Re-verification of contractor’s claim invoices in case of any ambiguity.
? Assisting QS Engineer regarding billing, changes other clarification issues.
? Assisting Contractor in Authorities approval such as Kahramaa, QCDD.
? Checking and verifying the submitted As-Built drawings on site
? Following up contractor regarding on time project close out dossier preparation.
Experience as Electrical Site Engineer
consolidated contractor company (CCC)
20 February 2018
20 June 2018
Duties and Responsibilities:
? Checked and contol the quality of works in different MEP activities such as installation of containments, cable conduits, trays, sizing, jointing, terminations and testing. Works included lighting, small power, CCTV, ACS, BMS, Telephone and Data, Grounding and Lighting protection.
? Installation of different electrical equipment and devices such as SMDBs, DBs, MCCBs, wire pulling, trays and trunking, lighting fixtures, FACP panels, smoke detectors and emergency lighting system and ensuring that it is as per project specifications.
? Installation of Containment and Conduiting having different sizes (First Fix).
? Managing and supervising 2nd fix (cable laying, pulling and their termination) in Power socket, Switch Plates, Industrial sockets including single phase and three phase. And Installation of 3rd Fix.
? Preparing daily site work plan and distributing among all foremen on sites
? Track and implement site progress to meet baseline in order to complete project on time.
? Managed daily, weekly and monthly shutdown schedules and progress reports.
? Installation,Cable gland-ding, DB,s Dressing and Termination of MDB, SMDB, LIGHTING DB,s etc.
? Selection of CB (Circuit Breaker) Such as MCB, MCCB, ACB, according to the load.
? Full command on control circuit & power circuit. And Electrical Drawings Basic Studies
Bachelor 01 June 2016
B.E Electrical EngineeringBachelor 01 July 2016
B. Sc Electrical Engineer