Experience as Senior Engineer-Electrical

• Employer

  Coastel energen pvt.ltd

• From

  01 December 2008

• To

  01 May 2014

• Detail

  7) 400kV GIS Substation- 1200MW Thermal Power Plant –Tuticorin, India
  
  8) Unit-1, Electrical -BOP package, (3x 250MVA Step up Transformer, IPBD, GCB, HT & LT Switch Gear panels and HT & LT Motors)
  
  9) UNIT-1&2 BTG Package including MV SWGR Panels,220V & 48V DCDB and Batteries, VFD drives for HT & LT Motors, -1200MW Thermal Power Plant –Tuticorin, India.
  
  Company: Coastal Energen (P) Thermal Power Plant-Tuticorin, India.
  Job position: Senior Engineer.
  Team Size: 30 No’s of Engineer and supervisors.
  Major Contractors handled: ABB, Siemens, Harbin Power electric company (china), and EDAC.
  Reporting to: Manger-Electrical.
  Highlights:
   Successfully installed and commissioned of 400kV GIS substation on schedule for providing power to the Power plant pre commissioning activities.
   Successfully Installed and commissioned of Unit-1, Electrical -BOP package, (3x 250MVA Step up Transformer, IPBD, GCB, 11kV & 6.6kV Unit HT & LT Switch Gear panels on schedule for providing power to the Power plant pre commissioning activities.
  
   All the works carried out on schedule including design and Procurement from HEC Harbin China, ABB Switzerland and Completed with 5 million safe man hour without LTI.
  
  Major Roles and responsibilities were:
   Design engineering Coordination, sizing, cost estimation & equipment selection as per project scope.
   Review the technical specification and analyze requirements of Major Equipment like 400kV GIS Substation, 20KV IPBD and 11 & 6.6 KV SPBD Oil Type Power transformers-ABB India (250MVA GT, 50 MVA, 45 MVA) Power transformer, Shunt Reactor, Capacitor Banks, Control & Protection & HV/MV cables and Communication Equipment.
   Tender support for substation projects, compliance, scope of work review & confirmation according to standard specification • Planning Coordination as per project duration.
   Procurement of all equipment & follow-up with manufacturer till the equipment delivery to site.
   Review and discuss with various department for major equipment base design, detail design and criticalities in project.
   As per project time schedule, Timely delivery the equipment to site, Issue manufacture release for all equipment and shipment clearance to supplier coordination to follow-up site installation.
   Worked ON SITE for FAT inspection in china Harbin for 12 weeks for all the generator & Auxiliaries.
   Supervise and Monitor all electrical activities- Installation of Cable, Cable tray, Lighting, Distribution control panel, all electrical equipment and grounding system, etc.
   Carried out Progress and witnessed testing and commissioning of 400 KV GIS control and relay panel – REC 670, RET 670, REL 670, P444 & REB500 with OMICRON CMC 356.
   Substation Automation System – Relay communication protocol - ABB PCM 600, MICOM STUDIO, HMI 750.
   Follow up and implementation of safety activities such as tool box meeting, safety demo etc., with safety team.
   Monitor activities of supervision contractors and construction contractors.
   Preparation of QA/QC reports, Nonconformance reports regarding electrical equipment installation, testing and commissioning.
   Reviewing all technical drawings, IFC drawings, shop drawings and ensure the ongoing activities are as per the IFC drawings.
   Perform Load calculation for sizing the equipment, control accessories and cables.
   Preparing daily, Weekly, monthly QA/QC reports for ongoing electrical activities.
   Testing and commissioning coordination of all major equipment in substation.
   Close out the snags clearance & to get the approval for spare parts and handed over the Turn Key Project.
  

Experience as Electrical Engineer

• Employer

  Dar Engineering

• From

  11 May 2014

• To

  01 January 2018

• Detail

  5) 380kV/110kV/33kV/13.8kV GIS Sub Station- Rabigh Refining & Petrochemical Company (Petro Rabigh)
  6) RIPP-2 380kV GIS Sub Station, Rabigh Independent Power Plant-2, Rabigh, KSA
  
  Company : Saudi Electricity Company-WOA, Saudi Arabia.
  Job position : Site Team Leader cum Electrical Engineer.
  Team size : Around 10 nos of Engineer.
  Major Contractors Handled: Hyundai Heavy Industries (HHI), Alfanar, ABB & Siemens.
  Reporting to: Project Manger
  
  Highlights:
   Successfully installed and commissioned of 380kV GIS substation on schedule for providing power to the Power plant pre commissioning activities.
   4 no’s 500kV HGIS are installed and commissioned at RIPP-2.
   Successfully commissioned for all remote end works with proper protection and control.
   Successfully Commissioned and Handover the projects of RIPP-2 on schedule with 1 million safe man hours and without LTI -2017.
  
  Major Roles and responsibilities were:
  
  • Project co-ordination with client/manufactures/contractors/sub-contractors /testing &commissioning team for completion of projects.
  • Project co-ordination with Civil, MEP and instrumentation team for the execution of electrical works.
  • Project Execution and Monitoring for Erection, testing and commissioning of all electrical works.
  • Review and Prepare of Project Technical Specification (PTS) and site engineering drawings Inspection and test Plan (ITP), FAT report with manufactures.
  • Preparation and Follow Up of procurement documents, Purchase order and FAT schedule, Document Technical Submittal (DTS) including vendors/suppliers/sub-contractor’s approval, design document and drawing approval with design team and client’s engineering team.
  • Review and preparation of overall time schedule and progress time schedule, Daily report, weekly report, monthly report, 3 weeks’ schedule and minutes of meeting for the project.
  • Preparation and Review of Data schedule and field quality plan as per SEC standards, IEC standards, BOQ of electrical items with procurements.
  • Carried out Site and factory inspection of materials as per the ITP and schedule.
  • Carried out the work and Material/equipment inspection and follow up for the proper storage system of inspected materials at site.
  • Witness of Scheme test or Functional test, testing of Inter‐trip panel and Tripping matrix and Monitor testing of Electrical, Instrumentation and Mechanical interlocking schemes.
  • Carried out Close loop test with SEC –Control Centre (WRCC) and other remote end Substations.
  • Prepare and Complete all snag list, Punch points, Quality Corrective actions, maintenance documents, Spare parts list before handover of project.
  • Conduct and implementation of safety activities such as tool box meeting, weekly site inspections, and safety training etc., with safety team.
  

Experience as Field Electrical Engineer

• Employer

  Bechtel Corporation

• From

  05 November 2018

• To

  04 November 2020

• Detail

  3) 570-C30 Potable Water Pump Station-Jubail including 11kV MV Unit SS, VFD & LV.
  
  4) 718-C31 City Centre Development Including Water pumping station, Telecom building, 33kV/11KV Unit Substations and Residential villas for staff
  
  Company : Royal Commission –Jubail, Saudi Arabia
  Major Contractors/Companies Handled: Al-Rafia contracting Co-KSA, HSH contracting CO –KSA, Alfanar Switchgear, Siemens Saudi electricity Company and Marafiq-KSA.
  Job position : Electrical Engineer.
  Team size : Around 25 nos of Engineer.
  Reporting to : Resident Engineer (RE)
  
  Highlights:
  • Approved major materials 33kV Unit switchgear (ABB), 11kV unit switchgear (alfanar), 11kV 33kV RMU (Alfanar) ,11kV MV power cable (Jeddah Cable)
  
  • Reviewed and Approved method statement and ITP plan for 11kV Generator, 33kV/11kV ,5MVA transformer, Pumps
  
  • Achieved best quality of works in cable tray fixing, power and Instrument cable laying of the project 570-C35.
  
  • Received Top 10 best quality award of the year of 2020 for the Project 570-C35.
  
  • Successfully Commissioned and Handover the projects 570-C35 on schedule with 1 million safe man hours and without LTI -2020.
  
  Major roles and responsibilities were:
  
   Ensure that all HVAC, plumbing, firefighting site activities are conducted under controlled conditions as per shop drawings, method statements, project specifications, local authorities, and work plans.
   Allotting work to Foreman, technicians, and laborers and making sure the allotted work is completed on time.
   Attend all project-related meetings with Client/Consultant/Main Contractor and reporting back to the General Manager on the proceedings.
   Managing the HVAC, plumbing, firefighting Shop Drawings, Material Submittals, Method Statements, Inspection Requests, Technical Queries (TQ/RFI).
   To receive all project-related instructions from the Client, Engineer, Main Contractor, etc, and transmit, communicate and arrange effective action in coordination with the Management.
   Ensures that all construction works are undertaken to required designs, specifications, standards, and Quality requirements.
   Preparing BOQ of MEP materials based on approved drawings.
   Arranging space/store on-site for materials.
   Mobilize and controlling of manpower, equipment, and materials at the site.
   Planning for next-day activities and preparing the target program on weekly basis.
   At project, closeout co-ordinate the production of as-built drawings to ensure they are delivered as per the contract requirements in terms of quality and time.
   Witness of Scheme test or Functional test, testing of Inter‐trip panel and Tripping matrix and Monitor testing of Electrical, Instrumentation and Mechanical interlocking schemes.
   Conduct and implementation of safety activities such as tool box meeting, weekly site inspections, and safety training etc., with safety team.
   Project coordination with Commissioning team and End Users (I.e.; Saudi Electricity Company, marafiq) for successful commissioning and handover the Projects.
   Providing training and presentation of Quality, Safety and technical info to the team as well Contractors.
   Prepare and Complete all snag list, Punch points, Quality Corrective actions, maintenance documents, Spare parts list before handover of project.
  

Experience as Electrical Engineer

• Employer

  Energy Assets Solution Pvt Ltd

• From

  06 November 2020

• To

  31 October 2021

• Detail

  1) 10 MW Solar Grid Connected Captive Power Generation-LFPS-Tirunelveli, India.
  
  2) 5MW Solar PV Power plant-O&M, Vikram’s Solar, Virdunagar,India
  
  Owner : Genentech Solar Solutions-India.
  Company : Energy Asset Solution Pvt Ltd. (Technical manpower services) –India
  Job Position : Electrical Engineer
  
  Major roles and responsibilities were:
  
   Responsible for operational level understanding of the requirement of the client/customer, Site Visits, Site feasibility & Solar Systems Design and complete execution.
   Able to check site feasibility and provide the best suitable option for enhancing suitability. Designing of arrangements of the solar panels for Rooftop & Ground Mounted & other various supported Electrical equipment & selection of cables for plant including layouts & schematic diagrams and calculation of technical Sizing, BOQ/BOM.
   Review and Selection of Mounting structure, cable tray, cables and Inverter in coordination with OEM.
   Plan, schedule and ensure execution of daily, weekly and monthly activities to ensure smooth operations of a solar power plant.
   Responsible of Site execution of 160KW inverter,800v/33kV IDT transformer, HV cables, 10kVA, 800V/415V Aux transformer, 415V ACDB panel, 330Wp Solar PV module and Mounting structures.
   Takes the responsibility of monitoring the performance of solar power plant on a day- to-day basis and must be available for immediate field trips in case of any fault recovery
   Regular monitoring and inspection
   Preventive and Corrective maintenance
   Co-ordinate with OEM vendors for equipment maintenance
   Travel to project sites and vendor locations as assigned to perform all aspects of on-site installation, repair, maintenance, oversight, and modifications as required
   Provide timely written review reports from field operation, status, and constructive feedback as requested.