saifullah
process engineer
islamabad
Summary of Career
Experience as
11 November 2010
12 May 2016
TSMLE is an ISO-9001 approved EPC company involved in projects related to Steel, Power Generation, Fertilizer, Petrochemicals, Oil and Gas Sectors.
As Process Engineer, My work area includes:
MAJORPROJECTS
Client: ENI Pakistan
Project: Optimization of gas gathering network
Client: Byco Petroleum Pakistan
Project: Detail Engineering for Heavy Naphtha/Jet Fuel Treatment Uni
Client: Tuwairqi gas reforming and processing plant
Project: Assistance for process engineering work
Client:Oil and Gas Development Company Limited Pakistan
FEED for MARU-RETI EWT Facility
Client: MOL Pakistan Oil and Gas Co. B.V
Project: Makori Field Development Surface Facilities
Experience as
06 June 2013
05 May 2016
Worked on Attock Crude oil refinery up gradation project with Hyundai engineering. I was assigned for following unit
• CDU and Diesel Hydrodesulphurization Unit Designed for Capacity of 12500 BPSD.
• Hydrogen Generating Unit.
• Amine unit
• Light naphtha hydro treating unit and ISOM unit
My responsibilities includes but not limited to;
• Process engineering support to refinery operations for process troubleshooting & improvement.
• Preparing daily performance summary and recommending corrective action to scope with abnormalities
• Responsibility for process design issues and deliverables on projects at all stages of the design process.
• Coordinate with operation to conduct test run,and implement changes if there is any.
• To check corrosion and process and operation problems and incorporate tham,
• Detail material and energy balance for revisions and in case of any punch.
• Perform and oversee chemical engineering calculations as necessary, with proficient use of Microsoft Excel, as well as simulation software platforms such as ASPEN Plus and HYSYS
• Develop client deliverables such as Process Flow Diagrams (PFDs), Piping & Instrumentation Diagrams (P&IDs) and process data sheets for equipment and instruments
• Reviews all aspects of design and construction for process consistency and safety, including leading HAZOP and pre-startup (PSSR) reviews
• Provide technical support during plant commissioning.
• Cost Benefit analysis.
• Planning and scheduling of pre and post startup activities of plant.
• Preparation of simulation models on HYSYS and providing process parameters to Operations.
• Crude Column Overhead Corrosion Control Program monitoring and providing chemical dosing rates to Operations
• Detail Pre-Heat Train Exchangers rating and sensitivity analysis in order to minimize products rundown temperature.
• Engineering support to process area (HDS AND HYU)
• Checking of piping loops during and after mechanical completion
• P&ID mark-up for system definition, hydro test status and erection progress
• Flushing of piping and equipment’s (preparation of flushing schemes and execution)
Punch list preparation for construction status and mechanical progress
• Assist machineries/equipment vendors and suppliers during installation and construction work
• Vessel and column inspection for mechanical completion and closure
• Preparation of SOP for compressors, heaters, filters, dryers etc.
• Detailed planning and supervision of shutdown, start-up and turn around activity.
Experience as
01 May 2016
10 May 2017
PROJECT:
Client Name: Abu Dhabi Company for Onshore Petroleum Operations Ltd. (ADNOC Onshore)
Project Title: Update operating manuals, SOP’S (900) & procedures (op&ms)(54) for ADCO fields, offsite, Utilities, terminals & pipelines of following fieds.
1. BU-HASA/HW/BQ
2. BAB
3. NORTH EAST BAB (NEB), including al dabb’iya/rumaitha/shanayel)
4. SE (ASAB/SAHIL)
5. SQM (shah/qusahwira/mender)
6. GAS ASSET (BAB GAS AND ASAB GAS)
7. TPO (jebel dhanna terminal, Fujairah terminal, mps, ips, ml-21, pipelines
Network and oil movement)
My responsibilities include
• Frequent visit to ADCO Remote sites with checking status of modification and updating the SOP and Operating manual according to it
• Frequent visit to site for Red line mark up of P&IDs and mark up of modifications
• To fill the checklist for all modifications
• Preparing the Project definition report
• To specify the Gap list for existing and updating OM and SOP
• To Prepare the need list of document for the commencement of project
• Fully aware with the wellhead production and injection trunk lines Schematics
• Have extensive knowledge of Process of Remote manifold stations and degassing stations
• Specifications, and technical bid evaluation and process inputs for proposals.
• Development of wellhead and flowline P&IDs of Oil and Gas Wells of ADCO ABU DHABI.
• Implementation of High Integrity Protective System (HIPS) on flowlines.
• Design of Methanol and Corrosion Injection System at the Wellhead Site.
• Preparation of List of deliverables and Variance Note.
• Standardization of Conventional and Unconventional Oil, Gas & Water Injection Wells
Experience as
30 May 2017
02 November 2018
PROJECT:
Middle Indus Single Plant Operation (MISPO) Project
Client: OMV Pakistan Exploration GmbH
OMV Pakistan has engaged SMEC Oil & Gas Pakistan to carry out techno-commercial concept selection & detailed engineering of selected option for Single Plant Operation of Middle Indus fields. Project involves the concept selection for the single plant operation at either location (Sawan CPP or Kadanwari Central Facility-KCF) and detail engineering of the selected option along with the adequacy check of associated interconnecting flow lines.
Responsibilities:
• Preparation of Concept Selection Report.
• Sales and Fuel gas generation calculations for multiple fields based on utilization ratios.
• Economic model preparation.
• Bid documentation review and Preparation of Basis of Design.
• Preparation of Process Documents i.e. Data Sheets, P&IDs & PFDs, Equipment List etc.
• Developed detailed Hydraulic and Process Simulation Models using PIPESIM and Aspen HYSYS.
• Vendor consultation regarding Units/Equipment Costs.
Dispersion & Thermal Radiation Analysis for Mardankhel-2/3 Wellhead Vent Stack
Client: MOL Pakistan Oil & Gas Co. B.V
MOL Pakistan has engaged SMEC Oil & Gas Pakistan to carry out dispersion & radiation analysis for Mardankhel-2/3 existing wellhead vent stacks at different relief loads and site conditions.
Responsibilities:
• Preparation of Dispersion and Thermal radiation analysis Report.
• Developed detailed dispersion analysis models using Phast DNV software.
• Developed detailed radiation analysis models using SHELL FRED software.
Dispersion & Thermal Radiation Analysis for Tolanj Wellhead Vent Stack
Client: MOL Pakistan Oil & Gas Co. B.V
MOL Pakistan has engaged SMEC Oil & Gas Pakistan to carry out dispersion & radiation analysis for Tolanj location wellhead vent stacks at different relief loads and site conditions.
Responsibilities:
• Preparation of Dispersion and Thermal radiation analysis Report.
• Developed detailed dispersion analysis models using Phast DNV software.
• Developed detailed radiation analysis models using SHELL FRED software.
Bachelor 30 November 2010
Bechlors in chemical engineering from university of karachi (2007-2010)