Experience as Trainee Engineer

• Employer

  Tapal Energy Limited 126MW SCPP - Pakistan

• From

  01 May 2013

• To

  30 April 2014

• Detail

  Operation Department
   To maintain the HFO Viscosity (15-18cst) by varying the temperature
   Wet Washing and Dry cleaning of Turbocharger to remove the dust and carbon
  Deposit on blades
   Regulate equipment operations and conditions such as water levels, oil level and
  Fuel requirement
   To ensure that the starting air Pressure and control air pressure are produced
  according to requirement
   To ensure that the steam is generated properly with required temperature
   Assist in Start-up, shut down and normal operations of the power plant systems

Experience as Application Engineer

• Employer

  Allied engineering & services LTD.

• From

  01 July 2014

• To

  28 February 2017

• Detail

  Allied Rental Modaraba Pvt Ltd(CAT):
   Provide Technical Support to Sales and Operation Department
   Diagnose the problems of Operation and Maintenance
   Looking after the operation and maintenance activities and keep eye on the
  Performance of Engines like fuel consumption, oil consumption, breaks down
  And identify the reason and rectify it
   Application/Technical Visits and provide the best possible technical solutions
   Looking after project from procurement till completion of projects
   Selection Of auxiliaries according to engine requirement (Ventilation Fan,
  Expansion Tanks and HX)
   Supervision of Installation and commissioning of Diesel and Gas Gensets
   Fleet Management

Experience as Assistant Manager Mechanical

• Employer

  DP WORLD KARACHI

• From

  01 March 2017

• To

• Detail

  DP World Karachi(QICT):
   Responsible for the preventive, corrective and planned maintenance of Container
  handling equipment containing RTGs,STS,QC and RS
   Responsible for the Inspection and maintenance of Structure, wire ropes, gear boxes
  and brakes of STS and QCs.
   Experience on Cummins KTA-19 (400KW) and KTA-50 (1 MW) Engines major and top engine
  overhauling. (Turbocharged & After cooled)
   To organize Preventive and Planned maintenance activities through MAINPAC CMMS.
   To calculate and optimize mean time between failures of equipments.
   Supervise mechanical works executed by contractors.
   To review of spare parts inventory, order spares, carry out parts inspections.
   To prepare Job Safety Analysis (JSA) for critical jobs.
   To prepare damage reports, Critical Inspection Report (CIR) for any accident occurred.
   Ensure all mechanical works should be performed, in time, with relevant quality, with in the
  budget and according to the safety policies of Dp World, Karachi.
   Maintain HSE (Health safety Environment